Palworld Breeding Path Calculator
Breeding in Palworld runs on hidden numbers, not luck. Every Pal has a breeding power, lower meaning rarer, and the egg becomes the Pal whose power sits closest to the parents’ combined target. This calculator predicts the offspring of any pair, plans the shortest multi-step path from a starter Pal to the one you want, and lists every parent pair that can produce a target Pal.
Select both parents first.
Select a starter and a different target first.
Select a Pal first.
Result
Breeding powers come from the community-verified 1.0 data set. Game patches can rebalance powers; if a pairing surprises you in-game, the table may need a refresh.
Dataset note: this tool uses the Palworld 1.0 breeding power table: 297 entries, every Pal that can enter a Breeding Farm, as last checked in October 2026. The latest reported patch at that check was v1.0.5, with no breeding-table change reported. Two further entries exist in the game roster (Astralym, power 10, and Panthalus, power 20), but neither can enter a Breeding Farm: Panthalus cannot use base facilities and Astralym is unobtainable, so neither is a parent or a breeding result in this tool, and adding them would give wrong answers. Rival calculators that quote 299 are counting the full roster, not the breedable set. The refresh cadence below states exactly when the table is re-checked.
Quick Answer
Breed Anubis (breeding power 480) with Cattiva (power 2,760). The target power is 1,620, and Dumud Gild sits at exactly 1,620, so the egg is Dumud Gild. The calculator above is pre-filled with this pairing: click Calculate to reproduce it. Switch to the Breeding path tab for the shortest chain from a starter Pal, or Find parents to list every pair that produces a target.
Key takeaways
- Every Pal has a hidden breeding power from about 30 to 3,100. Lower means rarer: Jetragon is 70, Anubis 480, Lamball 3,050.
- The egg is the Pal whose power is closest to the target: floor((parent 1 power + parent 2 power + 1) / 2).
- Special combinations bypass the power rule entirely, and a few of them produce a Pal rarer than either parent.
- Except for special combinations, the child can never be rarer than your rarest parent, because an average cannot fall below the lowest input.
How Palworld breeding works
Breeding in Palworld is deterministic: the same two parents always produce the same species. There is no dice roll on the species, only on passive skills.
Each Pal carries a hidden breeding power. Common early Pals sit near the top of the scale (Chikipi 3,080, Lamball 3,050), mid-game Pals sit in the middle (Anubis 480, Penking 2,070), and the rarest Pals sit at the bottom (Jetragon 70, Frostallion 150). When two Pals breed, the game computes a target from the parents' powers and the egg becomes the Pal whose power is closest to that target:
Offspring = the Pal with the breeding power closest to the target
Community data miners worked this formula out from the game files, and it is confirmed by several independent calculators, including the formula breakdown that mapped all 35,000-plus combinations and the breeding calculator built on the extracted breeding table.
Two exceptions break the averaging rule. Special combinations are fixed pairings with hard-coded children: Relaxaurus plus Sparkit always gives Relaxaurus Lux, Mau plus Pengullet always gives Mau Cryst, and Mossanda plus Petallia always gives Lyleen, which at power 240 is rarer than both parents. The second exception is the Katress plus Wixen pairing, which is gender-dependent: a female Wixen produces Wixen Noct, a female Katress produces Katress Ignis.
How to use the three calculator modes
Pick the tab that matches what you know. The result stays hidden until you click the action button.
- Find offspring: choose two parents and click Calculate. You get the child species, both parent powers, the target power, and whether a special combination applied. Parent order never matters.
- Breeding path: choose a starter Pal you own and the target you want, then click Find path. The planner searches every possible chain and returns the shortest one, each step breeding your current Pal with a wild-caught partner. Pre-filled with Lamball to Anubis.
- Find parents: choose a target Pal and click Find parents. The tool checks all 44,253 unique parent pairs and lists every one that produces your target, special combinations first, then power-average pairs. Pre-filled with Shadowbeak.
- Copy or share: the buttons under the result copy a text summary of the run for guild chats and breeding notes.
Worked examples, verified in the tool
Every number below is an actual run of the calculator above, not a hand computation.
| Run | Result |
|---|---|
| Anubis (480) × Cattiva (2,760) | Dumud Gild, target 1,620, exact power match |
| Mossanda (2,060) × Petallia (1,720) | Lyleen (special combo), rarer than both parents |
| Katress × Wixen | Wixen Noct / Katress Ignis, gender-dependent |
| Path: Lamball → Anubis | 3 breedings: Lamball × Aegidron → Bakemi (1,540); Bakemi × Aegidron → Tetroise (790); Tetroise × Jormuntide Ignis → Anubis (480) |
| Path: Cattiva → Jetragon | 4 breedings: Cattiva × Aegidron → Dynamoff (1,400); Dynamoff × Frostplume → Helzephyr (1,130); Helzephyr × Frostallion → Frostallion Noct (110); Frostallion Noct × Aegidron → Jetragon (70) |
| Parents of Shadowbeak | 75 parent pairs: 1 special combo (Astegon × Kitsun) plus 74 power-average pairs |
The Cattiva to Jetragon path shows the planner's real value: it walks from a common starter all the way down to a legendary in four breedings, something no static breeding chart will plan for you.
Lower is rarer: the scale runs from common Pals near 3,100 down to legendaries near 70, which is why the planner breeds progressively rarer partners to walk down the scale.
What competing calculators miss
The breeding-tool space is crowded, and the good ones agree on the data. Where they differ is what they do with it:
- QuickCalc's Palworld breeding calculator: the strongest single-pair tool, with the actual extracted breeding table behind it and both pair and reverse modes. No multi-step path planning: it tells you one pairing at a time.
- palworldbreeding.wiki: versioned 1.0 dataset with owned-Pal routes up to five generations and passive-transfer planning. The most complete dataset story, but a heavier interface for a quick question.
- Pal Routes: starts from your owned Pals and returns the shortest species route from your Palbox, which is the right model for 1.0 planning. Species routes only, no passive or IV planning.
- paldb.gg: breeding calculator plus a path finder and capture, base and team tools, all reading the game's own data tables. Excellent breadth, but the breeding tools are spread across separate pages.
- PlayGoHub and palworldonline.net: solid formula explainers with instant pair results and reverse planners. No chained path search.
- The gap this page fills: all three workflows on one page (pair, shortest-path chain, full reverse lookup), the gender-dependent Katress/Wixen case handled explicitly, and the rarity rule stated correctly: special combinations are the documented exception to "never rarer than the rarest parent".
The honest limits of this calculator
This tool plans the species of the egg, which is the deterministic part of breeding. The rest stays random by design:
- Passive skills inherit randomly from the parents. Repeating the same pairing can stack good passives, but no calculator here predicts the odds.
- Mutations are a rare random event that can add exclusive passives. Fancier cakes and breeding conditions affect the odds, not the species.
- Dataset age: the power table reflects the community-verified 1.0 data. Patches rebalance powers, so if the game disagrees with the tool on a pairing, the table needs a refresh, not the formula.
- Exact ties between two equally close Pals are broken toward the rarer (lower-power) candidate in this tool's lookup. The game uses an internal priority value for ties, which is not public.
Breeding at scale also means hatching at scale, and that means infrastructure: players running a dedicated server for a breeding operation can estimate the cost with our game server cost calculator. If you enjoy the collection side of creature games generally, the Pokemon card value calculator prices the other famous creature collection, and build planners like the Elden Ring build calculator scratch the same optimization itch in a different genre.
Dataset version and refresh cadence
The breeding power table in this tool is the Palworld 1.0 table, 297 entries, last checked in October 2026 against the game's reported state at patch v1.0.5. Palworld 1.0 (released 10 July 2026) rewrote the breeding table, so any later patch can change it again. The table is re-checked whenever any of these events happens: (1) Pocketpair publishes patch notes mentioning breeding, the combination table, breeding power, a new Pal, or Pal balance; (2) the game version number changes, major or minor; (3) a user reports an in-game breeding result that disagrees with this tool. Independently of those triggers, the table is re-checked at least once every three months even if nothing has been reported. A re-check compares every entry against the current game state and updates the tool, this section's version note, and the worked examples if any result changes.
Frequently asked questions
The game computes a target power as floor((parent 1 power + parent 2 power + 1) / 2), then the egg becomes the Pal whose hidden breeding power is closest to that target. Lower power means rarer. Special subspecies combinations bypass this rule with fixed results.
By the power-average rule, no: an average can never fall below the lowest parent power, so the child is never rarer than your rarest parent. The exception is special combinations, which ignore the average: Mossanda plus Petallia produces Lyleen, which is rarer than both parents.
Fixed pairings that ignore the power average and produce subspecies, like Relaxaurus plus Sparkit giving Relaxaurus Lux, Mau plus Pengullet giving Mau Cryst, or Mossanda plus Rayhound giving Grizzbolt. Katress plus Wixen is the gender-dependent special case.
It depends on the parents' genders: a female Wixen produces Wixen Noct, while a female Katress produces Katress Ignis. The calculator shows both outcomes because it cannot know your parents' genders.
Yes, passives inherit randomly from the parents, so breeding the same pair repeatedly can stack good passives. A rare mutation can add mutation-exclusive passives. This calculator plans the species of the egg; it does not predict passive inheritance odds.
The Breeding Farm needs cake to produce eggs. Cake affects breeding mechanics like mutation odds, not which species hatches. The 1.0 update also added the Ancient Hatchery as an alternative way to hatch eggs.
They are the community-verified 1.0 values, extracted from the game data and cross-checked against independent calculators. Patches can rebalance powers, so if a pairing surprises you in-game, the table may need a refresh. Note the dataset scope: this tool holds all 297 Breeding-Farm-eligible Pals. The 299 figure quoted by rival calculators is the full 1.0 roster, which additionally includes Astralym (power 10) and Panthalus (power 20); neither can enter a Breeding Farm, so both are correctly excluded here (see the dataset note above).
Add This Calculator to Your Website
Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.
Powered by Calculator Zilo
References
- Alex Liao, DEV Community. How Palworld's Hidden Breeding Formula Works: I Built a Calculator That Maps All 35K+ Combinations. Accessed October 23, 2026.
- PalDB. Palworld Calculators and Tools: Breeding, Capture, Base and Team. Accessed October 23, 2026.
- Palworld Breeding Wiki. Palworld 1.0 Breeding Calculator: Owned Pals and Passive Routes. Accessed October 23, 2026.
- Palworld Online. Palworld Breeding Calculator and Planner: All 299 Pals. Accessed October 23, 2026.
- PlayGoHub. Palworld Breeding Calculator. Accessed October 23, 2026.
- QuickCalc. Palworld Breeding Calculator: All Combos. Accessed October 23, 2026.
