Skip to content
CalculatorZilo Logo
  • Home
  • CalculatorsExpand
    • Browse all calculators
    • Education
    • Real Estate
    • Chemistry
  • Finance
  • Math
  • Health & Fitness
  • Science
  • About
  • Contact
CalculatorZilo Logo
Home / Chemistry Calculators / DPH Calculator 
Gaming Calculators

DPH Calculator 

Published onApril 21, 2026 Updated onOctober 21, 2026 6:10 pm

A combat log tells you the total, but not whether your build hits hard or just hits often. This DPH calculator turns your log totals into damage per hit, DPS and damage per minute, splits the average back into normal hits and crits, adjusts for accuracy, and scores how much of your theoretical damage you actually delivered during the fight.

It is pre-filled with a clean test fight: 10,000 damage over 100 hits at 2.5 attacks per second, with a 20% crit rate at a 2x multiplier over 50 seconds. Press Calculate and you should see 100.00 DPH, then swap in your own log numbers.

DPH Calculator
Damage per hit, DPS and DPM from your combat log, with crit split and uptime score
Damage per hit
Add fight duration for an uptime verdict

Theorycrafting aid. The formulas assume uniform hits; real games add armor, resistances, damage falloff, and RNG, so treat the split as a build comparison, not a promise about the next fight.

Quick Answer

With the pre-filled fight (10,000 damage, 100 hits, 2.5 attacks per second, 20% crit rate at 2x, 50 seconds), the calculator returns 100.00 damage per hit, 250.00 DPS and 15,000.00 damage per minute. The crit split works out to 83.33 normal hits and 166.67 crits, and because the fight only delivered 200 actual DPS, the uptime efficiency score is 80.0%.

Key takeaways

  • DPH is total damage divided by hits. It is an average that already includes your crits.
  • The crit split runs backwards from that average, so effective DPH always reconciles to the DPH you started with.
  • Effective DPS, not paper DPS, is the honest comparison number: it is DPS multiplied by your accuracy.
  • Uptime efficiency compares the fight you actually had with the fight the spreadsheet promised.
On this page
  • Quick Answer
  • How to use this DPH calculator with a real combat log
  • The formulas: DPH, DPS, DPM and the crit split
  • Worked example: 10,000 damage over 100 hits
  • DPH or DPS: which number should drive the build?
  • Reading your uptime efficiency score
  • What competing calculators miss
  • Frequently asked questions
  • Add This Calculator to Your Website
  • References

How to use this DPH calculator with a real combat log

Start with the log totals, not the tooltip numbers. Pull total damage and hit count from your damage meter for one fight or one target-dummy session, enter your attack speed from the character sheet, and add your crit rate and multiplier from the same sheet. Accuracy and fight duration are optional, but adding both is what turns a simple average into a diagnosis: accuracy explains missed damage, and duration exposes downtime.

One counting rule matters more than any other: count hits, not attacks. A single cast that ticks four times is four hits. Tabletop players meet the same distinction when they work out a dice average for a multi-dice weapon, where each die is averaged separately before the total is built. Mixing attacks and hits is the most common reason a hand-checked DPH never matches the log.

The formulas: DPH, DPS, DPM and the crit split

Four short formulas do all the work, and every one of them can be checked with a pocket calculator.

DPH = total damage ÷ number of hits
DPS = DPH × attacks per second
DPM = DPS × 60 (damage per minute on this page)
Normal hit = DPH ÷ (1 + crit rate × (multiplier − 1))
Crit hit = normal hit × multiplier
Effective DPS = DPS × accuracy

The crit split deserves a second look because it runs in the less obvious direction. Most tools ask for a normal hit and build the average up from it. A combat log already contains the crits, so this calculator divides the measured average back down: at a 20% crit rate with a 2x multiplier, the divisor is 1 + 0.20 × 1 = 1.20, which turns a 100 average into an 83.33 normal hit and a 166.67 crit. Research on expected damage in tabletop systems, such as the Pathfinder expected damage analysis hosted by the University of Wisconsin, uses the same averaging logic in the forward direction.

One naming warning: DPM here means damage per minute. Some shooter communities use DPM for damage per magazine, a completely different number built from clip size. If you compare this page's DPM with a forum post, check which definition the post is using before arguing about the result.

Worked example: 10,000 damage over 100 hits

The pre-filled values reproduce this example exactly. Total damage 10,000 over 100 hits gives DPH = 100.00. At 2.5 attacks per second, DPS = 100 × 2.5 = 250.00, and DPM = 250 × 60 = 15,000.00. The crit split at 20% and 2x gives a normal hit of 100 ÷ 1.20 = 83.33 and a crit of 166.67, and re-averaging them (83.33 × 0.8 + 166.67 × 0.2) returns 100.00, which confirms the split. Over the 50-second fight, actual DPS was 10,000 ÷ 50 = 200, so uptime efficiency is 200 ÷ 250 = 80.0%.

Normal hit
83.33
Average (DPH)
100.00
Crit hit
166.67

The bars show why the average can mislead on its own. Four out of five hits in this build land for 83.33, well under the headline 100, and the average only holds because the fifth hit crits for 166.67. Against a target that dies in two normal hits, this build feels weaker than its DPH suggests; against a boss, the average is the right lens.

DPH or DPS: which number should drive the build?

DPH decides breakpoints, DPS decides sustained fights, and confusing the two leads to bad gear choices. A slow cannon and a fast pea-shooter can share 250 DPS while behaving nothing alike: the cannon overkills small targets and wastes damage, while the pea-shooter may never cross an armor threshold at all.

Question you are askingNumber to trustWhy
How many hits to kill this target?DPH (and the normal hit)Breakpoints are counted in hits, not seconds
Which build clears a long boss fight faster?Effective DPSSustained output at your real accuracy decides the timer
Did I play the rotation well?Uptime efficiencyIt separates build strength from downtime
Is this burst weapon worth it?DPH plus crit hitBurst value lives in the size of single hits

Tabletop players run the same comparison per round rather than per second: the D&D average damage calculator averages dice and crits across an attack, and the broader D&D combat calculator folds those averages into full encounters. The unit changes, the logic does not.

Reading your uptime efficiency score

Uptime efficiency is actual DPS divided by theoretical DPS, shown as a percentage and as the verdict badge on the results. It measures execution and fight shape, not build quality, so only compare scores from the same fight or the same dummy test.

UptimeReadingVerdict
90% and aboveNear-constant damage, minimal gapsExcellent
75% to 89%Clean rotation with minor downtimeGood
60% to 74%Noticeable gaps: movement, dodging, target swapsNoticeable downtime
Under 60%Long dead stretches or a duration that includes setup timeHeavy downtime

A score above 100% is possible and it is a data problem, not a triumph: it means the fight duration you entered is shorter than the time your hits and attack speed would need, so one of the three entries is off. Damage meter design wrestles with the same question of where the clock starts, as the HunterPie damage meter documentation shows with its three different DPS timing strategies.

What competing calculators miss

Most DPS tools start from a weapon tooltip: base damage in, DPS out. That forward direction is fine for shopping, but it cannot audit a fight you already played, and it usually stops at paper DPS. Forum threads such as the Paizo discussion of how to calculate damage per round show players rebuilding this math by hand because the tools they find take the wrong starting point.

This page starts from the log instead. It reverse-engineers the normal and crit hits hiding inside your measured average, applies accuracy to get effective DPS rather than the optimistic headline, and adds the uptime score so a low result can be traced to downtime instead of blamed on the build. Game-specific wikis go deeper for their own title, for example the Shadowgun Legends damage statistics guide, but they lock the formulas to one game's stats. This calculator stays game-agnostic on purpose.

Frequently asked questions

DPH is total damage divided by number of hits. A log showing 10,000 damage over 100 hits gives 100 damage per hit. Count individual hits, not attacks, if a single attack can land more than once.

Multiply DPH by attacks per second. At 100 DPH and 2.5 attacks per second, DPS is 250. Damage per minute on this page is that DPS multiplied by 60.

Here DPH means damage per hit, the average damage of one landed hit. The same three letters mean unrelated things in other fields, so check the context before reusing a number from somewhere else.

Because the crit split is reverse-engineered from your measured average. Splitting 100 DPH into 83.33 normal hits and 166.67 crits at a 20% crit rate, then re-averaging, returns 100. It is a consistency check on the split, not new information.

Normal hit = DPH divided by (1 + crit rate x (multiplier - 1)). Crits pull the average up, so the normal hit always sits below the average when the crit rate is above zero and the multiplier is above one.

Between 80% and 95% is a clean rotation with minor downtime. Under 70% usually points to long gaps between engagements, heavy movement, or a fight duration that includes time before the first hit.

Accuracy, point for point. Effective DPS scales directly with accuracy, so dropping from 100% to 80% accuracy costs a fifth of your paper DPS, and no attack speed bonus recovers hits that never land.

Yes. Run each weapon's log totals through the calculator at your real accuracy and compare effective DPS, then check DPH separately if breakpoints matter for the content you run.

Add This Calculator to Your Website

Embed the DPH Calculator on your own site. Pick a size to preview it live, then copy the code.

Powered by Calculator Zilo

References

  1. J. Heim, University of Wisconsin Mathematics, "Pathfinder Expected Damage Calculator" - worked expected-damage and critical-hit averaging for tabletop weapons, the forward version of the crit averaging used on this page. University of Wisconsin: Pathfinder Expected Damage Calculator. Accessed October 2026.
  2. Shadowgun Legends Wiki, "Key Damage Statistics and How to Calculate" - definitions of DPS and damage per magazine in a live shooter, including the fire-rate conversion this page contrasts with. Shadowgun Legends Wiki: Key Damage Statistics. Accessed October 2026.
  3. Paizo Community, "How Do You Calculate DPR" - practitioner discussion of damage-per-round formulas, hit chance and crit terms from the Pathfinder publisher's forums. Paizo Forums: How Do You Calculate DPR. Accessed October 2026.
  4. HunterPie Project, DeepWiki, "Damage Meter Widget" - documentation of the three DPS timing strategies (quest time, join time, first hit) that sit behind uptime comparisons. DeepWiki: HunterPie Damage Meter Widget. Accessed October 2026.
  5. Allakhazam, "The Math of Combat (WoW)" - the classic step-by-step breakdown of how a hit is assembled, mitigated by armor and doubled on a critical strike. Allakhazam: The Math of Combat. Accessed October 2026.

Related calculators

Gaming CalculatorsPaladin Talent CalculatorPlanning a paladin build starts with a simple question: how many talent points do you actually have, and where should they go.Gaming CalculatorsHunter Talent CalculatorNot every Hunter build question needs a full talent tree.Gaming CalculatorsFallout 76 CalculatorFallout 76 rewards planning: perk cards, mutations and legendary effects stack on top of each other, and small choices compound into big damage differences.Gaming CalculatorsShaman Talent CalculatorA shaman talent planner answers one question before you touch a single talent: how many points do you actually have, and where should they go?Gaming CalculatorsHigh Alch CalculatorCheck whether an item is worth alching in Old School RuneScape before you buy a stack of them.Gaming CalculatorsFallout 4 Build CalculatorFallout 4 hands you 28 S.P.E.C.I.A.L.

We use cookies to analyze traffic. You can accept or decline cookies below. Learn more

calculatorzilo

CalculatorZilo

Free calculators for everyday life. No signup, no cost, just answers.

Categories

Finance Math Health & Fitness Education Science Real Estate Chemistry Browse all calculators

Popular tools

Mortgage Payment Calculator BMI Walking Calculator Salary Per Minute Calculator Percentage Off Calculator

Company

About Us Contact Us Privacy Policy Terms and Conditions
Disclaimer Cookie Policy DMCA Policy Affiliate Disclosure FAQ Accessibility Statement

© 2026 CalculatorZilo • Free calculators for everyone

  • Home
  • Calculators
    • Browse all calculators
    • Education
    • Real Estate
    • Chemistry
  • Finance
  • Math
  • Health & Fitness
  • Science
  • About
  • Contact
Search