Ira Drawdown Calculator
How long will one IRA actually last? That is a narrower question than planning a whole retirement, and it deserves its own answer. A single IRA has one balance, one withdrawal, and one expected return, and the arithmetic between them decides the year the money runs out. This calculator simulates that one account year by year, names the age the balance reaches zero, and then builds the required minimum distribution schedule for the same balance path, so you can see whether the IRS will force out more than you planned to take.
That single-account focus is what separates this page from a whole-retirement plan. If you want to price an entire retirement, with living expenses minus Social Security and pension income and withdrawals that rise with inflation, use our withdrawal retirement calculator. That tool answers how much a household needs. This page answers a different question: how long does this one IRA last, and what does the IRS require from it along the way?
Quick Answer
A $500,000 IRA with $40,000 yearly withdrawals at a 6% return runs out at age 89: 24 years of withdrawals totaling $960,000. The withdrawal rate is 8.0%, which is why the balance declines from the start. At 73 the projected balance is $401,025 and the first RMD is $15,133, well under the planned $40,000, so the RMD never binds in this plan.
Key takeaways
- The withdrawal rate decides everything. At 8% the example IRA lasts 24 years; at 4% ($20,000 a year) the same balance keeps growing and never runs out inside the simulation.
- RMDs start at 73 or 75 depending on birth year: 73 for those born in 1951 to 1959, 75 for those born in 1960 or later.
- RMD math is one division: balance divided by the IRS life-expectancy factor. At 73 that is $401,025 divided by 26.5, which gives $15,133.
- Always compare the RMD with your plan. If the required withdrawal is larger than what you wanted to take, the surplus still comes out and is still taxed.
How long does the money last? The two forces
Every year, two forces fight over your IRA. Growth adds balance times return, and the withdrawal subtracts your spending. When the withdrawal rate exceeds the return, the balance shrinks, and the decline then accelerates, because each later year grows a smaller base. At 8% withdrawals against 6% growth, the example loses ground every year from the start.
The simulation is deliberately simple so the result stays auditable. Each year the balance grows by the return you entered, then the fixed withdrawal comes out, then the next year repeats from the new balance. That order matters: growth applies before the withdrawal each year. The withdrawal never rises with inflation, no tax or fees are taken out, and the return never varies. A real IRA will wobble around this path, which is why the run-out age is a planning figure, not a promise.
Balance at your current age.
Balance times one plus the return.
Subtract the fixed yearly amount.
Compare the RMD floor, then repeat.
Two honest limits deserve stating plainly. First, the simulation stops at age 110: a result of 110 means the money was still there at the cap, not that it lasts forever. Second, the final year counts as a full withdrawal year even when the remaining balance is smaller than the withdrawal, which is why total withdrawn is simply years times the yearly amount. Both conventions keep the tool’s arithmetic checkable by hand.
The 4% figure used as a comparison is a commonly used starting withdrawal rate: 4% of $500,000 is $20,000 a year. It is a benchmark for judging your own rate, not a safe-withdrawal guarantee for this account. Your rate is the first number to look at in the results: anything far above the return you entered means the balance is on a countdown, however large it looks today.
RMDs: the IRS sets a floor from 73
Starting at your RMD age, the IRS requires minimum withdrawals from a traditional IRA each year. The amount is the balance divided by your life-expectancy factor from the IRS Uniform Lifetime Table. The calculator builds your personal schedule from your projected balance path, so the RMD and the run-out age come from the same simulation instead of from two separate tools.
In real life, each year’s RMD uses the prior December 31 balance, not a projected balance. That distinction matters most in a falling market: a balance that dropped late in the year still produces an RMD based on the higher year-end figure. The schedule here is therefore a planning estimate that shows the shape of the requirement, and the exact figure for a given year should be recomputed from the actual prior year-end balance. A dedicated figure for one year, without the drawdown simulation, is what our required minimum distribution calculator provides.
The first RMD year carries a timing trap worth knowing. The first RMD may be delayed until April 1 of the following year, but the second year’s RMD is still due by December 31 of that same year, so delaying stacks two taxable withdrawals into one calendar year. Missing an RMD entirely is worse: the excise tax is 25% of the shortfall, reduced to 10% if the failure is corrected inside the correction window, and the missed amount itself still has to come out and be taxed. Reasonable-cause relief is requested on Form 5329, not granted automatically.
| Age | Uniform Lifetime factor | Required share of balance |
|---|---|---|
| 73 | 26.5 | 3.77% |
| 74 | 25.5 | 3.92% |
| 75 | 24.6 | 4.07% |
| 76 | 23.7 | 4.22% |
| 77 | 22.9 | 4.37% |
| 78 | 22.0 | 4.55% |
| 79 | 21.1 | 4.74% |
| 80 | 20.2 | 4.95% |
The table above is the Uniform Lifetime Table for ages 73 to 80, as published in IRS Publication 590-B. The tool itself carries factors from age 72 to 85 and shows the first eight years from your chosen RMD age. Because the factor shrinks every year, the required share rises even when the balance falls, which is why RMDs overtake modest spending plans late in retirement.
When the RMD binds, and when it does not
Whether the RMD matters depends entirely on the gap between your plan and the floor. Two cases from this same tool show both sides.
Your plan covers the RMD
Withdraw $40,000 a year from $500,000 at 6%. The first RMD at 73 is $15,133, far below the plan, and the verdict reads “Your plan covers the RMD”. Nothing changes: you were already taking more than the IRS requires.
The RMD forces more out
Withdraw only $20,000 a year from the same $500,000 at 6%. The balance grows to $598,975 by 73, so the first RMD is $22,603, above the plan, and the verdict flips to “RMD forces more out”. The surplus comes out anyway, is taxed as ordinary income, and can be reinvested in a taxable account or donated, but it cannot be put back into the IRA.
The dangerous case is the frugal retiree who withdraws 2% and is forced out at 4% to 8% in their late 70s and 80s, pushing income into a higher bracket in exactly the years when the balance is supposed to be coasting. That is the scenario the moves below are designed to defuse, and it is invisible in any tool that shows only a run-out age or only an RMD figure.
Four moves that stretch an IRA
First, consider Roth conversions before RMD age. Converting in your 60s, especially in low-income years before Social Security starts, shrinks the balance that future RMDs are computed on, because Roth IRAs have no lifetime RMDs for the original owner. The tax cost of a conversion is worth modelling year by year, which is what our IRA to Roth conversion calculator does. Second, use qualified charitable distributions from age 70 and a half: money sent directly from the IRA to charity counts toward the RMD and never enters taxable income, up to the annual limit set by the IRS.
Third, sequence withdrawals with tax in mind. A common order is taxable accounts first, then tax-deferred accounts, then Roth last, letting tax-free growth run longest, but your own bracket and the RMD floor may change that order in a given year. Fourth, remember that delaying Social Security to 70 raises the monthly check and therefore lowers the amount the IRA must supply each year, which directly extends the run-out age in this simulation. None of these moves changes the tool’s arithmetic; they change the inputs you bring to it, which is the honest way to use a simulator.
If instead you want payments that cannot run out by contract, that is a different product, not a different setting on this tool. Our IRA annuity calculator converts the same kind of balance into fixed payments and compares them with the 4% withdrawal rule, which is the right comparison when guaranteed income matters more than keeping control of the balance.
What rival calculators get wrong
The IRA calculators ranking today split into two camps that never meet. The RMD calculators are excellent at their one job: one RMD guide publishes the clearest Uniform Lifetime Table with per-balance reference amounts and worked examples, and another walks through first-year double distributions and spousal-age edge cases. But they answer only what you must take, never how long the money lasts. The drawdown tools answer longevity but usually as annuity sales pitches, where the calculator exists to sell the annuity as the answer rather than to simulate the account honestly.
Two further gaps are worth naming. Some older drawdown pages still quote the pre-SECURE 2.0 penalty of 50% for a missed RMD, which has been 25% since the law changed, with 10% on a timely correction. Others model inherited IRAs under the 10-year emptying rule, which is a different tax regime from an owner’s own drawdown and should never be used to plan your own account. This page’s winning moves are the combination its rivals split apart: one balance path, a run-out age from that path, an RMD schedule derived from the same path, and an explicit verdict on whether the RMD binds. Nothing here is a quote, a sales funnel, or a second account type in disguise.
Frequently asked questions
This tool simulates one IRA only: one balance, one fixed withdrawal, one return. A whole-retirement plan prices household expenses minus Social Security, pension, and other income, with withdrawals that rise over time. Use this page when the question is about one account, and the whole-retirement tool when the question is about the household.
Add This Calculator to Your Website
Copy the code below and paste it into any page or post to embed this calculator. Choose a size first if you want a different width: the preview stays hidden until you pick a size.
References
- Internal Revenue Service. Publication 590-B, Distributions from Individual Retirement Arrangements (IRAs). Accessed October 25, 2026.
- Internal Revenue Service. Retirement Topics: Required Minimum Distributions (RMDs). Accessed October 25, 2026.
- Internal Revenue Service. Required Minimum Distribution Worksheets. Accessed October 25, 2026.
- Internal Revenue Service. Publication 590-A, Contributions to Individual Retirement Arrangements (IRAs). Accessed October 25, 2026.
- Internal Revenue Service. About Form 5329, Additional Taxes on Qualified Plans (including IRAs) and Other Tax-Favored Accounts. Accessed October 25, 2026.
- Internal Revenue Service. Publication 575, Pension and Annuity Income. Accessed October 25, 2026.
- Internal Revenue Service. 401(k) Limit Increases to $24,500 for 2026, IRA Limit Increases to $7,500. Accessed October 25, 2026.
- Internal Revenue Service. Notice 2025-67, Cost-of-Living Adjustments for 2026. Accessed October 25, 2026.
- United States Congress. H.R. 2617, Consolidated Appropriations Act, 2023 (Division T, SECURE 2.0 Act of 2022). Accessed October 25, 2026.
- Internal Revenue Service. Topic No. 557, Additional Tax on Early Distributions from Traditional and Roth IRAs. Accessed October 25, 2026.
