Isolated Margin Calculator
Isolated margin ring-fences one leveraged position: the margin you assign to it is the most it can lose. Enter a position size, leverage and entry price below, pick long or short, and the calculator returns the isolated margin required, an estimated liquidation price, the adverse move that reaches it, and the maximum loss.
Optional. Blank counts as 0.5%.
Estimates only: real liquidation prices include trading fees, funding payments and each exchange’s exact maintenance-margin tiers, and exchanges trigger liquidation on the mark price, not the last traded price. This is an educational tool, not trading advice.
Quick Answer
A $50,000 long position at 10x leverage with a $50,000 entry and a 0.5% maintenance margin rate needs $5,000 of isolated margin. Its estimated liquidation price is $45,250, a 9.50% drop from entry, and the maximum loss is the $5,000 margin itself. The same trade opened as a short liquidates at an estimated $54,750, a 9.50% rise.
- Quick Answer
- How to use the isolated margin calculator
- The isolated margin and liquidation formulas
- Worked example: a $50,000 long at 10x
- Isolated margin vs cross margin
- What the liquidation estimate leaves out
- What competing calculators miss
- Frequently asked questions
- Add This Calculator to Your Website
- References
How to use the isolated margin calculator
Three inputs and a direction are all it takes: the tool divides size by leverage for the margin, then applies the long or short liquidation formula to your entry price. Follow these steps:
- Pick a direction. Long and Short use mirrored formulas, and switching direction hides any previous result so you never read a stale number.
- Enter the notional position size in dollars. This is the full position value (margin times leverage), not the amount you plan to post.
- Enter the leverage and entry price. Leverage must be at least 1x; the entry price is whatever the position opens at.
- Set the maintenance margin rate if you know it. Your exchange shows the rate for your position's risk tier. Leave the field blank and the tool uses 0.5%, the common starting tier for small positions.
- Click Calculate and read the margin, the liquidation estimate, the adverse-move percentage and the capped maximum loss together, never the liquidation price alone.
If you are comparing this against a pooled account instead, the companion cross margin liquidation calculator works the same problem from the whole-account side, where every position shares one balance.
The isolated margin and liquidation formulas
Isolated margin required is the position size divided by the leverage. The liquidation estimate then moves the entry price by one divided by the leverage, adjusted by the maintenance margin rate (MMR): down for a long, up for a short.
Margin = position size ÷ leverage
Long liquidation ≈ entry × (1 − 1/leverage + MMR)
Short liquidation ≈ entry × (1 + 1/leverage − MMR)
Adverse move = 1/leverage − MMR, expressed as a percentage of entry
The MMR term is why liquidation arrives slightly before your margin is fully spent. Exchanges close the position while a small maintenance buffer remains, which is also why Bybit's contract rules define maintenance margin as the MMR multiplied by the contract value at the open price, with a closing taker fee folded in. The adverse-move line is the one worth memorizing: at any leverage, the market only has to move against you by roughly 1/leverage before the position is gone. Traders checking whether a planned entry leaves room for a sensible stop often run the numbers alongside an intraday profit calculator to weigh the target against that distance.
Worked example: a $50,000 long at 10x
The pre-filled values reproduce this example exactly. A trader opens a $50,000 long at an entry price of $50,000 using 10x leverage, on an exchange tier with a 0.5% maintenance margin rate:
- Margin: $50,000 ÷ 10 = $5,000. That is the amount ring-fenced to this position, and the most it can lose.
- Liquidation estimate: $50,000 × (1 − 0.1 + 0.005) = $50,000 × 0.905 = $45,250.
- Adverse move: ($50,000 − $45,250) ÷ $50,000 = 9.50%. A drop of less than a tenth wipes out the position.
- Short version: the same inputs as a short give $50,000 × (1 + 0.1 − 0.005) = $54,750.
The pattern as leverage rises, holding the entry at $50,000 and the MMR at 0.5% for a long:
| Leverage | Margin on $50,000 | Liquidation estimate | Adverse move |
|---|---|---|---|
| 2x | $25,000.00 | $25,250.00 | 49.50% |
| 5x | $10,000.00 | $40,250.00 | 19.50% |
| 10x | $5,000.00 | $45,250.00 | 9.50% |
| 25x | $2,000.00 | $48,250.00 | 3.50% |
| 50x | $1,000.00 | $49,250.00 | 1.50% |
| 100x | $500.00 | $49,750.00 | 0.50% |
Read the last column as a survival window. At 25x a 3.50% swing liquidates the trade, and at 100x a routine 0.50% wick does it. Nothing about the coin has to go wrong; ordinary volatility is enough.
The badge above the results grades that same adverse-move percentage in three bands: under 2% is a Tight buffer, 2% to under 5% is a Moderate buffer, and 5% or more is a Wide buffer. On those bands the worked example at 9.50% reads Wide, the 25x row at 3.50% reads Moderate, and the 50x and 100x rows read Tight.
Key takeaways
- Margin is size divided by leverage; the adverse move to liquidation is roughly 1/leverage minus the MMR.
- Isolated mode caps the loss on a position at its assigned margin. It does not make the trade safer, only the blast radius smaller.
- The estimate excludes fees, funding and tier changes, so treat the real liquidation price as slightly closer than the number shown.
Isolated margin vs cross margin
The difference is what stands behind the position. Isolated mode assigns a fixed margin balance to one position; cross mode lets every position draw on the whole account, as Binance Academy's comparison of isolated and cross margin lays out.
Isolated margin
- Loss on a position is capped at its assigned margin.
- One bad trade cannot drain the rest of the account.
- You manage margin position by position, adding funds manually to push liquidation away.
- Positions liquidate sooner because no outside balance rescues them.
Cross margin
- The full account balance backs every open position.
- Positions survive deeper adverse moves before liquidation.
- A single liquidation event can consume the entire account.
- Harder to attribute risk: one position's losses eat another's buffer.
Neither mode changes the math of a trade, only the collateral behind it. Isolated suits speculative or high-leverage positions where a hard loss cap matters; cross suits hedged books where positions offset each other.
What the liquidation estimate leaves out
The formula is a planning estimate, not the exchange's trigger. Four real-world factors move the actual liquidation price closer to your entry than the estimate suggests:
- Fees. Entry and exit fees are charged against the margin, and Bybit's rules fold a closing taker fee into the maintenance requirement itself.
- Funding payments. Perpetual positions pay or receive funding, commonly every 8 hours. A long paying funding bleeds margin the whole time it is open, so a position held for days liquidates earlier than a fresh one.
- Tiered maintenance rates. The MMR rises with position size on every major exchange. A rate of 0.5% fits small positions; a six-figure position may sit in a 1% or higher tier, which is why this calculator lets you set the rate yourself.
- Mark price and partial liquidation. Exchanges trigger liquidation on the mark price, a fair-value index designed to ignore wicks on a single venue, and many liquidate only part of a large position first. Your exchange's displayed liquidation price is the one that counts.
What competing calculators miss
Exchange calculators from Binance and Bybit are precise, but they are locked to one venue's tiers and assume you already understand the terms. The independent liquidation tools that rank for this topic mostly stop at the liquidation price itself. Three gaps show up again and again:
- No maximum-loss readout. The whole point of isolated mode is the loss cap, yet most tools never state it. This page prints it on every result.
- No adverse-move percentage. A liquidation price of $45,250 means little until it is expressed as a 9.50% move, the number a trader can compare against an asset's normal daily range.
- A silent MMR. Several tools hard-code 0.4% or 0.5% with no way to change it, so the estimate quietly breaks for larger positions in higher tiers. Here the rate is an input, and blank still defaults to the standard 0.5%.
Frequently asked questions
Isolated margin is a margin balance assigned to a single position. Only that balance backs the trade, so if the position is liquidated, the loss is limited to the margin assigned to it and the rest of your account is untouched.
Divide the notional position size by the leverage. A $50,000 position at 10x leverage needs $50,000 ÷ 10 = $5,000 of isolated margin. At 25x the same position needs $2,000, and at 5x it needs $10,000.
For a long, multiply the entry price by (1 − 1/leverage + MMR). For a short, multiply by (1 + 1/leverage − MMR). At a $50,000 entry, 10x leverage and a 0.5% MMR, a long liquidates near $45,250 and a short near $54,750.
The maintenance margin rate (MMR) is the minimum margin, as a fraction of position size, that an exchange requires to keep a position open. Small positions on major exchanges often start near 0.5%, and the rate rises in tiers as the position grows, which pulls the liquidation price closer to entry.
Not on that position: the loss is capped at the margin assigned to it, which is the defining feature of isolated mode. The cap does not cover margin you later add to the position, and fees charged during liquidation come out of the same balance.
Isolated is better for controlling risk on a single trade because the maximum loss is fixed in advance. Cross is better for capital efficiency and for hedged positions that offset each other, but one liquidation can consume the whole account balance.
Because the estimate excludes trading fees, funding payments that drain margin over time, and tier increases in the maintenance margin rate. Exchanges also trigger liquidation on the mark price rather than the last traded price, so the real trigger can arrive earlier than a simple formula suggests.
Low leverage, typically in the 2x to 5x range, keeps the adverse move to liquidation between about 19.50% and 49.50% at a 0.5% MMR. That leaves room for normal price swings. At 25x the buffer shrinks to 3.50%, which ordinary volatility can cross in a single session.
Yes. Funding payments are settled from your margin balance, so a position that pays funding loses margin the longer it stays open. That shrinking balance moves the effective liquidation price closer over time, even if the entry price and leverage never change.
No. This calculator is an educational estimation tool. Leveraged trading can lose the full margin assigned to a position, and you should verify any liquidation price against the figure your own exchange displays before relying on it.
Add This Calculator to Your Website
Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.
Powered by Calculator Zilo
References
- Binance Academy. What Are Isolated Margin and Cross Margin in Crypto Trading?. Accessed October 22, 2026.
- Binance Academy. Isolated Margin (Glossary). Accessed October 22, 2026.
- Bybit. Contract Rules: Crypto Margin Trading (Maintenance Margin, Isolated and Cross Margin, Liquidation). Accessed October 22, 2026.
- Bybit Help Center. FAQ: Order Execution and Liquidation. Accessed October 22, 2026.
- BitMEX. Isolated Margin. Accessed October 22, 2026.
- BitMEX. Cross Margin. Accessed October 22, 2026.
- BitMEX. Liquidation. Accessed October 22, 2026.
- Deribit. Margin Types and Usage. Accessed October 22, 2026.
- U.S. Commodity Futures Trading Commission. Understand the Risks of Virtual Currency Trading. Accessed October 22, 2026.
- Financial Conduct Authority. FCA Bans the Sale of Crypto-Derivatives to Retail Consumers. Accessed October 22, 2026.
