G&A Rate Calculator
The G&A rate is the share of overhead a business carries for every dollar of direct work: total general and administrative expenses divided by total direct costs, times 100. This calculator solves the relationship three ways, so you can find the rate from the two cost figures, or work backwards from a target rate to the direct costs it implies or the G&A budget it allows. Government contractors will recognize the structure from indirect rate work under the FAR; the same arithmetic serves any business checking what administration costs it per dollar of production.
Calculation Mode: Rate Calculation
Calculation Details:
Total G&A Expenses (G): $0.00
Total Direct Costs (D): $0.00
G&A Rate: ($0.00 ÷ $0.00) × 100 = 0.0%
Quick Answer
With $250,000 of G&A expenses against $2,000,000 of direct costs, the G&A rate is 12.5%: every dollar of direct work carries 12.5 cents of administrative cost. The calculator labels 12.5% a reasonable rate, its band for 10% to under 15%. It is pre-filled with this example, and the same two numbers solve backwards: a 12.5% rate on $2,000,000 of direct costs means a $250,000 G&A budget.
Key takeaways
- The rate is only as meaningful as its base. This tool divides by total direct costs; a rate built on total cost input or revenue is a different number and cannot be compared to it directly.
- Enter any two of the three values. If all three are filled in, the expenses and direct costs win and the rate field is ignored.
- The verdict text under the result is the tool’s own banding (under 5% up to 30% and above), not an industry standard. Treat it as a prompt to look closer, not a grade.
- Classification drives the answer. Moving one salary from direct to G&A moves both the numerator and the base, so tidy cost coding matters more than decimal places.
- Quick Answer
- How to use the G&A rate calculator
- The G&A rate formula and the base question
- Worked example: three modes, one set of numbers
- What counts as G&A, and what counts as direct
- Reading the result: the tool’s rate bands
- What competing calculators miss
- Limits and honest edges
- Frequently asked questions
- Add This Calculator to Your Website
- References
How to use the G&A rate calculator
Fill in any two fields for the same period and click Calculate. The tool works out which of the three relationships you are asking for and names it in the result as the calculation mode.
- To find the rate: enter total G&A expenses and total direct costs for the same period, leave the rate field blank. Mode: Rate Calculation.
- To find the direct costs behind a known rate: enter G&A expenses and the rate, leave direct costs blank. The tool divides the expenses by the rate. Mode: Direct Costs Calculation.
- To find the G&A budget a rate allows: enter direct costs and the rate, leave G&A expenses blank. The tool multiplies. Mode: G&A Expenses Calculation.
- Mind the priority rule: if expenses and direct costs are both positive, the tool always computes the rate from them, whatever sits in the rate field. Clear a field when you want a backwards solve.
- Read the verdict last: the analysis line bands your rate from very low to high. The bands are this tool’s labels, explained in the table below, not published benchmarks.
The G&A rate formula and the base question
The formula is a pool divided by a base, the same shape as every indirect rate in cost accounting.
G&A Rate = (Total G&A Expenses ÷ Total Direct Costs) × 100
Solved backwards: Direct Costs = G&A Expenses ÷ (Rate ÷ 100), and G&A Expenses = Direct Costs × (Rate ÷ 100).
The base is where honest rates diverge. This tool’s denominator is the figure you enter as total direct costs. In federal contracting, where the Federal Acquisition Regulation Part 31 cost principles and Cost Accounting Standard 410 govern how G&A expense is allocated, the most common base is total cost input under FAR 31.203: all costs except the G&A pool itself, which usually makes the base larger and the rate lower than a direct-costs-only base. Other firms divide by revenue or by direct labor. None of these is wrong in itself, but a 12.5% rate on direct costs and a 12.5% rate on total cost input describe different cost structures. If your contract or your accountant specifies a base, total that base and enter it in the direct costs field: the division the tool performs is the same.
Worked example: three modes, one set of numbers
The worked example uses one quarter with $250,000 of G&A expenses and $2,000,000 of direct costs. Each mode below was run in the tool above and returns the same trio of values.
| Mode | You enter | The tool returns |
|---|---|---|
| Rate Calculation | G $250,000, D $2,000,000 | Rate 12.5% |
| Direct Costs Calculation | G $250,000, rate 12.5% | D $2,000,000.00 |
| G&A Expenses Calculation | D $2,000,000, rate 12.5% | G $250,000.00 |
Applied to a single contract, the rate is how G&A gets priced in. A job with $400,000 of direct costs at a 12.5% rate carries $50,000 of G&A, for a cost of $450,000 before fee or profit. That is the number bids are built from, and it is why a two-point error in the rate is worth real money on a large base. Businesses that also track overhead variances will find the same pool-and-base thinking in the controllable overhead variance calculator and the fixed overhead volume variance calculator, which compare actual overhead against what the rate structure expected.
What counts as G&A, and what counts as direct
The numerator is the cost of running the company as a whole; the denominator is the cost of doing the work itself. The line between them is a classification decision, and consistent classification beats clever classification.
G&A expenses (the pool)
- Executive and administrative salaries (management, HR, accounting, legal)
- Corporate office rent and utilities
- Accounting, audit and legal fees
- General business insurance
- Office supplies, IT and communications for admin functions
- Business development and corporate marketing
Direct costs (the base, as this tool defines it)
- Direct labor: wages for work traceable to a product or contract
- Raw materials and components used in production
- Subcontractor costs for contracted work
- Equipment and travel charged directly to a job
- Other costs a timesheet or invoice ties to one cost objective
One correction to a list this page used to print: factory rent, plant utilities and production supervision are usually overhead, an indirect pool of their own, not direct costs. Putting them in the denominator here inflates the base and understates the rate. Keep the base to costs directly traceable to work, or deliberately enter a total cost input base if that is your system, and say which you did. How the remaining direct costs convert to margin is a separate question, covered by the direct margin calculator.
Reading the result: the tool’s rate bands
Every result carries one of six analysis lines. These are the labels coded into this calculator, printed here so the verdict never surprises you.
| Rate | What the tool says |
|---|---|
| 30% and above | High G&A rate: may indicate need for cost reduction or process optimization |
| 20% to under 30% | Above average: common for service-based or technology companies |
| 15% to under 20% | Moderate: typical for many industries with balanced cost structure |
| 10% to under 15% | Reasonable: indicates efficient administrative operations |
| 5% to under 10% | Low: excellent administrative efficiency, common in manufacturing |
| Under 5% | Very low: exceptionally lean administrative structure |
Use the bands as a first look, then judge against your own history and your sector on the same base. A firm can lower its printed rate without saving a dollar by widening the base, which is why auditors ask about the base before they ask about the rate.
What competing calculators miss
Most G&A tools online do exactly one division and stop. Comparing the field against this page:
- The backwards solves. Rival tools (CalculatorsHub, BraveCalculator) take expenses and a base and return a rate. Budgeting usually runs the other way: a target rate and a forecast base set the G&A budget. This tool solves for any one of the three values.
- The base warning. Competitors quietly use different denominators: direct labor on one site, direct costs on another, revenue on a third, and none of them flag that their rates cannot be compared. This page states its base on the field itself and explains how to enter a total cost input base instead.
- A stated verdict scale. Rivals call a rate good or high without printing their thresholds. The six bands here are published in full in the table above, so you can see exactly why the tool said what it said.
- The mode, named. The result states which calculation ran (rate, direct costs or G&A expenses). On a three-input tool with a priority rule, that label is the audit trail; tools that silently recompute invite expensive misunderstandings.
Limits and honest edges
This is a single-pool, single-base calculator, and four limits follow from that.
- One pool only. Firms with fringe, overhead and G&A tiers need each rate computed on its own base; run this tool once per pool with that pool’s base.
- Provisional versus final. Government contractors bill at provisional rates and settle at final audited rates under FAR 52.216-7. A rate from this tool is an estimate for planning and proposals, not a settled rate.
- Allowability is separate. FAR 31.205 lists costs that are unallowable in government work (advertising, entertainment and others). They must come out of the pool before the division; the tool cannot tell an allowable dollar from an unallowable one.
- Zero and negative entries count as missing. The tool reads any field that is blank, zero, negative or non-numeric as not entered, so a genuine zero G&A pool cannot be calculated; it reports that at least two values are needed instead. A period with no G&A spend has a 0% rate by definition.
Rates also move with the period chosen. A quarter with an annual insurance premium in it prints a higher rate than the trailing year will, so compare like periods: this quarter against the same quarter last year, or full years against full years. What the rate does to bottom-line profit, once pricing is set, shows up in tools like the adjusted net profit calculator.
Frequently asked questions
Your G&A rate is your general and administrative expenses expressed as a percentage of a cost base, here your total direct costs. A rate of 12.5% means every dollar of direct work carries 12.5 cents of administrative cost. Businesses use it to price work, budget overhead and, in government contracting, to claim indirect costs under the FAR.
Divide total G&A expenses by the cost base and multiply by 100. With $250,000 of G&A expenses and $2,000,000 of direct costs: 250,000 / 2,000,000 x 100 = 12.5%. Use the same period for both numbers, and be clear which base you used, because a rate on direct costs is not comparable to a rate on total cost input or revenue.
Any two of the three: G&A expenses, direct costs and the rate. The tool solves for the third. One rule matters: if G&A expenses and direct costs are both entered, the tool computes the rate from them and ignores the rate field, so clear one cost field when you want to solve backwards from a rate.
The denominator is the figure you enter as total direct costs. Federal contractors often use a total cost input base instead, meaning all costs except the G&A pool itself, as FAR 31.203 and Cost Accounting Standard 410 describe. If that is your system, total that base and enter it in the direct costs field; the division is identical, only the base changes.
No. Overhead covers indirect costs tied to production or a line of business, such as plant supervision and factory utilities, and is usually applied on a direct labor base. G&A covers running the company as a whole and sits one tier above overhead. Many firms run both rates, plus a fringe rate, in a three-tier structure.
There is no universal standard, because the rate depends on the base and the industry. This calculator bands its verdicts: under 5% is very low, 5% to under 10% low, 10% to under 15% reasonable, 15% to under 20% moderate, 20% to under 30% above average, and 30% or more high. Judge your number against your own past rates on the same base before judging it against anyone else’s.
Because of the priority rule coded into it. When G&A expenses and direct costs are both positive, computing the rate from them takes priority and the rate field is not read. To solve backwards, clear either the G&A expenses field or the direct costs field, then enter the rate with the remaining value.
At least annually, and quarterly if the business is growing or bidding cost-based work. Government contractors typically bill at provisional rates during the year and settle at final rates after the year closes, so a rate that drifts from actual costs creates either a repayment or a shortfall at settlement.
Add This Calculator to Your Website
Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.
Powered by Calculator Zilo
References
- Federal Acquisition Regulation. FAR 2.101: Definitions, including G&A expense and total cost input. Accessed October 21, 2026.
- Federal Acquisition Regulation. FAR 31.203: Indirect Costs and Allocation Bases. Accessed October 21, 2026.
- Federal Acquisition Regulation. FAR 31.205: Selected Costs, including unallowable costs. Accessed October 21, 2026.
- Federal Acquisition Regulation. FAR 52.216-7: Allowable Cost and Payment, provisional and final indirect rates. Accessed October 21, 2026.
- Cost Accounting Standards Board, via Cornell Law Institute Legal Information Institute. 48 CFR 9904.410-50: CAS 410 techniques for applying G&A allocation. Accessed October 21, 2026.
- Defense Contract Audit Agency. Incurred Cost Submissions: Guidance for Contractors. Accessed October 21, 2026.
- Internal Revenue Service. Publication 535: Business Expenses. Accessed October 21, 2026.
- U.S. Small Business Administration. Federal Contracting Guide for Small Businesses. Accessed October 21, 2026.
- Financial Accounting Standards Board, via Deloitte Accounting Research Tool (DART). Accounting Standards Codification, Topic 720: Other Expenses. Accessed October 21, 2026.
- U.S. Government Accountability Office. Defense Contracting: DCAA Audit Coverage and Indirect Cost Oversight (GAO-19-321). Accessed October 21, 2026.
