Torso Length Calculator
Your torso length, not your overall height, decides which backpack frame fits you. Two hikers at the same height can need completely different pack sizes. This Torso Length Calculator gives you two ways to get the number: enter a direct tape measurement from the base of your neck to your hip line, or estimate it from your height and inseam if you have no tape handy. You get the torso length in inches and centimeters, your torso-to-height ratio, and the matching backpack size.
The height and inseam estimate is a rough guide. A tape measurement from C7 to hip line is always more accurate. The results stay hidden until you click Calculate.
Quick Answer
A hiker who is 68 inches tall and measures 19 inches from C7 to hip line has a torso length of 19.0 in (48.3 cm), a torso-to-height ratio of 27.9%, and a Medium (M) backpack size. Those values are pre-filled in the calculator above. Without a tape measure, the estimate from height and inseam is only a starting guess: the same page shows why in the worked example below, where one estimate lands outside the typical adult band entirely.
Key takeaways
- Torso length is measured from the C7 bump at the base of the neck to the line across the top of the hip bones. Pack makers size frames by this number, not by height.
- A direct tape measurement always beats the estimate. The estimate subtracts inseam and a flat 12 inches from height, and that 12 is an unsourced rule of thumb, not a measured constant.
- The calculator's size bands are a simplified scale (XS under 16 in through XL at 22 in and up). Real brands overlap their bands and shift the edges, so always check the specific pack's chart before ordering.
- The tool does not check hipbelt fit. Hip circumference is a separate measurement, and a right torso size with a wrong hipbelt still fits badly.
- Quick Answer
- How to measure your torso length
- How to use the torso length calculator
- The torso length formula, both routes
- Worked example: the direct measurement, then the estimate that overshoots
- Torso length versus height, and why the ratio is on the page
- Backpack size chart: the calculator's bands, and how brands really do it
- What other torso length calculators miss
- Frequently asked questions
- Add This Calculator to Your Website
- References
How to measure your torso length
Use a flexible tape, a friend, and two minutes. Self-measuring down your own back is unreliable, because you cannot keep the tape on your spine and read it at the same time.
Stand naturally, not slouched and not stretched tall. Measure along the curve of the spine rather than holding the tape straight like a plumb line, and do not pull it tight. REI's daypack fitting guide describes the same two landmarks and adds the point this calculator cannot check for you: hip size matters as much as torso length, so measure around the top of your hips on the same line before you buy. The waist calculator takes waist, hip and height tape measurements, so a hip tape measurement like the one the hipbelt needs is also an input there.
How to use the torso length calculator
The worked example is pre-filled, so clicking Calculate once shows the direct-measurement result. The results stay hidden until you calculate.
- Pick the unit first: inches or centimeters. The choice applies to all three fields, including the direct measurement, so a centimeter tape reading must go in with centimeters selected.
- Enter your height and inseam. Both are required even when you enter a direct measurement, because the ratio divides torso length by height. This is a quirk of the tool, not a mistake in your entry: a direct measurement alone will not calculate.
- Enter the direct measurement if you have one. When this field has a number, it overrides the estimate completely. To use the estimate instead, clear this field.
- Click Calculate torso length: the result rows show torso length in inches and centimeters, the torso-to-height ratio, the backpack size, and which method was used.
- Copy or share the result with the buttons in the results area.
Invalid inputs are rejected with plain messages: a missing height ("Please enter your height."), a missing inseam ("Please enter your inseam."), a zero or negative height or inseam, a zero or negative direct measurement ("The direct torso measurement must be greater than zero."), and a combination that gives zero or less ("Those numbers give a torso length of zero or less. Please check your height and inseam.").
The torso length formula, both routes
The direct route is a measurement, not a calculation: what the tape says is the torso length. The estimate route is arithmetic built on one rough assumption.
Estimate route: torso length = height − inseam − 12 (all in the same unit)
Centimeters: torso cm = torso in × 2.54
Ratio: torso-to-height ratio = torso length ÷ height × 100
The 12 in the estimate stands in for everything between the top of the head and the C7 bump plus the gap the inseam does not cover, and it is a single flat number applied to every body. That is why the estimate is a starting guess: real head-and-neck lengths vary, and so does the relationship between inseam and true leg length. Treat any estimate as a reason to borrow a tape, not as a fitting.
Worked example: the direct measurement, then the estimate that overshoots
A hiker is 68 inches tall and measures 19 inches from C7 to hip line. Those figures are pre-filled, and the calculator returns 19.0 in, 48.3 cm (19 × 2.54), a ratio of 19 ÷ 68 × 100 = 27.9%, and Medium, because 19 falls in the 18 to under-20 band. No estimate is involved: the direct field overrides it.
Now clear the direct field and let the estimate run on a 70-inch height with a 32-inch inseam: 70 − 32 − 12 = 26.0 in (66.0 cm), a 37.1% ratio, and Extra Large. That 26-inch figure sits well outside the range most adults' tape measurements fall in, roughly the mid-teens to low twenties, and that gap is the point. The estimate does not know this person's head length or leg proportions, so it can overshoot by inches. A second estimate shows the other side: a 62-inch height with a 32-inch inseam gives 62 − 32 − 12 = 18.0 in (45.7 cm), a 29.0% ratio, and Medium, a perfectly ordinary result. Same formula, two very different levels of trust, which is why the results label the method every time.
| Case | Torso | Ratio | Size | Method |
|---|---|---|---|---|
| 68 in tall, 19 in tape | 19.0 in (48.3 cm) | 27.9% | Medium (M) | Direct tape measurement |
| 70 in tall, 32 in inseam, no tape | 26.0 in (66.0 cm) | 37.1% | Extra Large (XL) | Estimated from height and inseam |
| 62 in tall, 32 in inseam, no tape | 18.0 in (45.7 cm) | 29.0% | Medium (M) | Estimated from height and inseam |
Torso length versus height, and why the ratio is on the page
Height alone is a poor predictor of pack fit. Long legs with a short torso and short legs with a long torso can share the same height but need different frame sizes, and the frame has to span exactly from shoulders to hip line for the hipbelt to carry most of the load. The ratio puts your build in context: the worked example's 27.9% says just over a quarter of that hiker's height is torso, while the overshooting estimate's 37.1% is itself a warning sign, since a torso over a third of total height is unusual and usually means the estimate, not the body, is wrong. For another body measurement that also uses your height, the body surface area calculator compares six published formulas.
Backpack size chart: the calculator's bands, and how brands really do it
The calculator grades torso length on five clean bands. They are a simplified scale, and they are the bands the tool actually uses, so the table below is exact for this page.
| Torso length | Pack size | In centimeters |
|---|---|---|
| Under 16 in | Extra Small (XS) | Under 40.6 cm |
| 16 to under 18 in | Small (S) | 40.6 to under 45.7 cm |
| 18 to under 20 in | Medium (M) | 45.7 to under 50.8 cm |
| 20 to under 22 in | Large (L) | 50.8 to under 55.9 cm |
| 22 in and up | Extra Large (XL) | 55.9 cm and up |
Real brands do not use clean bands. Osprey's own sizing instructions overlap theirs: women's S runs 15 to 19 inches, women's M 17.5 to 21 inches, and unisex S/M 15 to 20 inches with M/L 18 to 24 inches, so an 18- or 19-inch torso legitimately falls in two sizes and the choice comes down to trying the pack loaded. Some Osprey lines use the cleaner S 16 to 18, M 18 to 20, L 20 to 22 pattern the old page called an industry standard, but that is one maker's pattern, not a standard, and this page no longer claims otherwise. If you land between two sizes, most fitters suggest sizing down for a closer shoulder wrap or up for a lower hipbelt position, and packs with adjustable suspensions can bridge a gap of an inch or two. If you are also budgeting the trip itself, the backpacking cost calculator covers the money side.
What other torso length calculators miss
The dedicated rivals are thin. The only dedicated torso calculator found returns three broad buckets, short, medium and long, with no centimeter toggle on results and no context about your build. Brand sizing pages teach the C7-to-iliac-crest measurement well but give you no calculator at all: you measure, then hunt through overlapping charts like Osprey's to place yourself. Height-based sizing charts skip the measurement entirely and repeat the exact error this page exists to fix.
- Three-bucket tools: a direct measurement in, a vague bucket out. No ratio, no centimeter output, no estimate mode for when you have no tape.
- Brand sizing guides (Osprey, REI): the measurement teaching is excellent and this page follows it, but the charts overlap and vary by model, and none of them converts your measurement or grades an estimate.
- Height-based charts: "medium height, medium pack" advice that fails every long-legged or long-torso hiker. Height never enters this page's size decision except through the ratio.
- The gap this page fills: both routes in one tool, inch and centimeter output together, the ratio for build context, the method labelled on every result, and the estimate's weakness stated in the open instead of hidden behind a confident number.
Frequently asked questions
Tilt your head forward to find the bony C7 bump at the base of your neck, then have a friend measure along your spine down to the imaginary line between your thumbs when your hands rest on your hip bones (the iliac crest). That distance is your torso length. Measure standing naturally, and have someone else read the tape.
No. Torso length is only the C7-to-hip portion of your body. Two people of identical height often have torso lengths several inches apart, which is why packs are sized by torso, not height.
Because most of a loaded pack's weight should ride on your hips, not your shoulders. The frame has to span exactly from your shoulders to your hip line, and only the torso measurement describes that span.
Most manufacturers suggest sizing down for a snugger shoulder wrap and higher hipbelt, or sizing up for a lower hipbelt position. Packs with adjustable suspensions can also bridge the gap by an inch or two. Try the pack loaded before you commit, since brands overlap their bands.
Roughly. Subtracting your inseam and 12 inches from your height gives a ballpark figure, which is what this calculator's estimation mode does. It is a starting guess, not a fitting: the flat 12 is an unsourced rule of thumb, and the estimate can overshoot by inches, so confirm with a real measurement before buying.
Yes. Pick centimeters in the unit selector before you type anything, and the selector applies to all three fields, including the direct measurement. Results always show both inches and centimeters either way.
Because the tool requires both before it calculates anything, and it needs your height to compute the torso-to-height ratio. Enter your height and inseam, then the direct measurement, and the direct value overrides the estimate.
No. Hipbelt fit depends on your hip circumference measured around the top of your hip bones, which this tool does not ask for. Check that measurement against the specific pack's hipbelt range separately, since a right torso size with a wrong hipbelt still fits badly.
Add This Calculator to Your Website
Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.
Powered by Calculator Zilo
References
- REI Expert Advice. Daypacks: How to Choose (torso length and hip size as the fit factors, C7 and iliac crest landmarks, hipbelt positioning). Accessed October 24, 2026.
- Osprey Packs. Backpack Sizing and Fit for Women: Manual Pack Sizing Instructions (C7 to iliac crest method, overlapping women's and unisex torso bands). Accessed October 24, 2026.
- Osprey Packs. Everything You Ever Wanted to Know About Sizing and Fit (torso-based pack sizing, adjustable torso lengths). Accessed October 24, 2026.
- Peak Gear Guide. How to Fit a Backpack (2026 Guide) (six-step fitting sequence, torso measurement first, load lifters at 30 to 45 degrees, loaded fitting). Accessed October 24, 2026.
- Take Travel Info. Properly Fitting Your Hiking Backpack (C7 to iliac crest method, torso length over height, hip circumference as a separate fit check). Accessed October 24, 2026.
