Required Rate of Return Calculator
The required rate of return is the minimum annual return that justifies an investment’s risk, and there is more than one honest way to set that bar. This calculator offers three models in one place: the dividend growth model for dividend stocks, CAPM for pricing risk with beta, and a goal-based mode that finds the constant annual return needed to turn a present amount into a future target. Every result is broken into its components, so you can see whether yield, growth or market risk produced the number.
Educational estimates only, not investment advice. The models assume constant dividend growth and stable risk; real returns vary year to year.
Quick Answer
The three pre-filled examples land in the same neighbourhood two different ways. The dividend growth model gives 9.00% (a $2.50 dividend on a $50 stock is a 5.00% yield, plus 4.00% growth), CAPM also gives 9.00% (3% risk-free rate plus a beta of 1.2 on a 5.00% market premium), and growing $12,000 into $20,000 in 5 years needs 10.76% a year. Pick the model that matches your question in the calculator above.
Key takeaways
- Required return is a hurdle, not a forecast: invest only when the expected return clears it.
- Gordon growth splits the answer into dividend yield plus growth. CAPM splits it into the risk-free rate plus a beta-scaled risk premium. Goal mode works backwards from a target.
- The Gordon model wants next year's dividend. Entering last year's dividend understates the answer by a year of growth.
- The tool does arithmetic, not policing: negative dividends, negative betas and a market return below the risk-free rate all run. Sanity-check the inputs before trusting the output.
- Quick Answer
- How to use the required rate of return calculator
- The three formulas, and what each one assumes
- Worked examples: three models, checked against the tool
- Seeing the components: where the 9.00% comes from
- Which model should you use?
- Getting CAPM inputs that are not made up
- Required return vs expected return: the comparison that decides
- What competing calculators miss
- Frequently asked questions
- Add This Calculator to Your Website
- References
How to use the required rate of return calculator
Start by picking the model that matches your question, then fill in that model's three fields. Switching models hides the results, so calculate again after a switch.
- Dividend growth fits a dividend-paying stock you are valuing on its payouts: expected annual dividend, current price, dividend growth rate.
- CAPM fits a risk comparison for any asset with a beta: risk-free rate, beta, expected market return.
- Goal-based fits a savings target with no contributions: present amount, target amount, years available.
- Click Calculate and read the component lines, not just the headline: they show whether yield, growth or risk is driving your number.
Each mode names its own missing input ("Enter the expected annual dividend.", "Enter beta.", "Enter the number of years."). The goal mode also rejects zero or negative amounts and years, and the Gordon mode rejects a price of zero or below, because both would make the math meaningless.
The three formulas, and what each one assumes
All three modes answer "what return do I require?" with a different definition of the question. The formulas are standard; the assumptions underneath them are where they differ.
CAPM: RRR = Rf + β × (Rm − Rf)
Goal-based: r = (FV ÷ PV)1/years − 1
The Gordon growth model, from Gordon and Shapiro's 1956 dividend discount work, treats the required return as the dividend yield plus the growth rate, which assumes dividends grow at one constant rate forever. Watch the dividend input: the formula wants the expected dividend, and most data sources quote the trailing one, so the dividends calculator figures and a company's last four payments need a year of growth added before they belong here. CAPM, from Sharpe's 1964 capital asset pricing work, prices only systematic risk: diversifiable risk earns nothing, and beta carries the whole risk story. Goal mode is plain compound growth run backwards, the same mathematics as a CAGR calculation, which is why its answer is directly comparable to the output of a CAGR return calculator.
Worked examples: three models, checked against the tool
Each example below is pre-filled in its mode, and each row of the checks table is a real run of this calculator. Run any of them and you will get the same figures back.
| Mode and inputs | Components the tool shows | Required return |
|---|---|---|
| Gordon: dividend $2.50, price $50, growth 4% | Yield 5.00%, growth 4.00% | 9.00% |
| Gordon: dividend $3, price $75, growth 2% | Yield 4.00%, growth 2.00% | 6.00% |
| CAPM: risk-free 3%, beta 1.2, market 8% | Premium 5.00%, beta adjustment 6.00% | 9.00% |
| CAPM: risk-free 4.5%, beta 0.8, market 9% | Premium 4.50%, beta adjustment 3.60% | 8.10% |
| Goal: $12,000 to $20,000 in 5 years | Growth multiple 1.667x | 10.76% |
| Goal: $1,000 to $1,100 in 0.5 years | Growth multiple 1.100x | 21.00% |
Seeing the components: where the 9.00% comes from
The headline number hides its own story, so the tool prints the parts. In the two stock models the parts are built from different ingredients that happen to reach the same total here.
Bars are drawn to scale against a 10% axis, using the worked examples. The practical lesson: a Gordon answer driven mostly by growth rests on a forecast, while a CAPM answer driven mostly by the beta adjustment rests on a risk estimate. Same total, different fragility.
Which model should you use?
Use the model whose inputs you can actually defend. A model fed with a guessed beta or a fantasy growth rate returns a precise-looking number built on sand.
| Model | Best for | Breaks down when |
|---|---|---|
| Dividend growth | Mature dividend payers with a steady payout history | The stock pays no dividend, or growth is uneven; constant growth forever is a strong assumption |
| CAPM | Comparing assets of different risk, cost of equity, hurdle rates for projects | Beta is stale or unstable; a single factor carries all risk, a known weakness Fama and French documented |
| Goal-based | A lump sum that must reach a target by a date | You plan to add contributions along the way; for that, the target return calculator models the deposits too |
When two models apply to the same stock, run both. Agreement, like the twin 9.00% results in the worked examples, is mild reassurance. A wide gap means one set of assumptions is doing something aggressive, and the component lines show you which.
Getting CAPM inputs that are not made up
CAPM is only as good as its three inputs, and each has a defensible public source. The risk-free rate should be a current Treasury yield: the 10-year Treasury series on FRED updates daily, and the Federal Reserve's H.15 release is the underlying publication. For the expected market return, long-run historical averages and implied premium estimates such as Aswath Damodaran's NYU Stern datasets are the standard anchors, not last year's index return.
Beta is the softest input. Providers compute it over different windows against different indexes, so two sources routinely disagree by 0.2 or more, and at a 5% market premium that disagreement moves the answer by a full percentage point. Negative betas exist in the data (some gold and defensive assets) and the calculator will run one without complaint: at a risk-free rate of 3%, a beta of −0.5 and an 8% market return, it returns 0.50%. That is the formula working as written, not a recommendation to demand half a percent from a volatile asset.
Required return vs expected return: the comparison that decides
A required return means nothing until it is set against an expected return. Required is the minimum you demand; expected is what analysis says the asset will actually deliver, the quantity an expected rate of return calculator estimates from probability-weighted scenarios.
The decision rule is mechanical: expected above required, the investment clears its hurdle; expected below required, pass or negotiate a lower price until the yield part rises enough to clear it. This is also how the number gets used inside companies, where the CAPM result becomes the cost of equity and then part of the discount rate for judging projects. Keep the two concepts separate and most required-return confusion disappears: this page builds the bar, not the forecast of whether anything clears it.
What competing calculators miss
Almost every rival picks one model and stops, and several get their own arithmetic or framing wrong:
- Gordon-only tools (WPcalc, CreativeWidgets): correct dividend formula, nothing else. No beta, no risk premium, no goal mode, and WPcalc's framing calls the dividend "current" without warning that the formula needs next year's expected dividend, the single most common way this model gets misused.
- CAPM-only tools (Akyno, Savvy Calculator, BearSavings): the CAPM formula done properly with premium breakdowns, but no dividend model and no goal mode. One widely copied CAPM explainer even works its own example wrong, printing 3% + 1.2 × (8% − 3%) as 8% when the arithmetic gives 9%.
- Valuation-first tools (MarketGenius): strong on the D1 versus D0 distinction and on solving for price, but the required return there is an input you bring, not the answer you get.
- The gap this page fills: all three definitions of required return in one tool, every result split into components, the D1 warning stated on the page and in the input tooltip, and the tool's tolerance for impossible inputs disclosed instead of hidden.
Frequently asked questions
The minimum annual return an investment must deliver to be worth its risk or to hit a goal. It is a hurdle: if the expected return is below the required return, the investment fails the test. This calculator builds the hurdle three ways, from dividend cash flows (Gordon growth), from risk pricing (CAPM), or backwards from a money goal.
With the dividend growth model: divide the expected annual dividend by the current price and add the dividend growth rate. A $2.50 dividend on a $50 stock growing at 4% a year gives 5.00% yield plus 4.00% growth, a 9.00% required return. The calculator shows both components separately so you can see which one is doing the work.
Next year's. The Gordon growth formula wants the expected dividend over the coming year, often written D1. If your source quotes the trailing dividend D0, grow it once before entering it: D1 = D0 × (1 + g). A $2.00 trailing dividend at 4% growth becomes a $2.08 expected dividend. Entering D0 directly understates the yield part of the answer by one year of growth.
The Capital Asset Pricing Model prices risk. Start with the risk-free rate, then add a reward for market risk scaled by beta, which measures how hard the investment swings with the market. At a 3% risk-free rate, a beta of 1.2 and an 8% expected market return, the market risk premium is 5.00%, the beta adjustment is 6.00%, and the required return is 9.00%.
Match the rate to your horizon: a Treasury bill rate for short horizons, the 10-year Treasury yield for long-term equity estimates. Use a current market quote, not a historical average. The Federal Reserve's H.15 release and the FRED DGS10 series both publish the 10-year yield daily.
The calculator will produce one, and it is arithmetic, not advice. In goal mode a target below your starting amount gives a negative answer by design: turning $20,000 into $10,000 over 5 years requires −12.94% a year. In the Gordon and CAPM modes a negative result means an input is off, such as a negative dividend, a negative beta, or an expected market return below the risk-free rate, all of which the tool accepts without a warning.
No. Goal mode solves for the constant annual return that grows one present amount into one future amount, with nothing added in between. If your plan involves monthly investing, that is a different question with a different answer, and it needs a contribution-aware tool rather than this one.
The investment's published beta from a current market data source. Broad index funds sit near 1.0, defensive sectors such as utilities often sit below 1.0, and aggressive growth stocks often sit above 1.0. Beta is an estimate that drifts over time and differs between providers, so note whose beta you used before comparing two CAPM results.
Add This Calculator to Your Website
Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.
Powered by Calculator Zilo
References
- Sharpe, William F. Capital Asset Prices: A Theory of Market Equilibrium under Conditions of Risk, Journal of Finance, 19(3), 1964 (the original CAPM paper: expected return equals the risk-free rate plus beta times the market premium). Accessed October 24, 2026.
- Gordon, Myron J., and Eli Shapiro. Capital Equipment Analysis: The Required Rate of Profit, Management Science, 3(1), 1956 (the dividend discount analysis behind the Gordon growth model used in the first mode). Accessed October 24, 2026.
- Fama, Eugene F., and Kenneth R. French. The Capital Asset Pricing Model: Theory and Evidence, Journal of Economic Perspectives, 18(3), 2004 (the standard review of CAPM's strengths and its documented empirical weaknesses). Accessed October 24, 2026.
- Damodaran, Aswath (NYU Stern School of Business). Country Default Spreads and Risk Premiums (current implied equity risk premiums and country risk premiums, the standard public anchor for the expected market return input). Accessed October 24, 2026.
- Damodaran, Aswath (NYU Stern School of Business). Historical Returns on Stocks, Bonds and Bills (annual US returns back to 1928, the long-run averages used to sanity-check market return assumptions). Accessed October 24, 2026.
- Federal Reserve Bank of St. Louis. Market Yield on US Treasury Securities at 10-Year Constant Maturity (DGS10) (the daily 10-year Treasury yield commonly used as the CAPM risk-free rate for long horizons). Accessed October 24, 2026.
- Board of Governors of the Federal Reserve System. Selected Interest Rates (Daily) – H.15 (the official daily release behind Treasury constant maturity yields). Accessed October 24, 2026.
- French, Kenneth R. (Tuck School of Business, Dartmouth). Kenneth R. French Data Library (the research return series, market premiums and factor data used to estimate and test betas and market returns). Accessed October 24, 2026.
- CFA Institute Research Foundation. Country Risk: A Tale of Two Models (why practitioners argue CAPM's beta understates some risks and how country risk adjustments are layered on). Accessed October 24, 2026.
- US Securities and Exchange Commission, Investor.gov. Compound Growth Calculator (the SEC's own compound growth tool, the forward direction of the goal mode's backwards calculation). Accessed October 24, 2026.
