Skip to content
CalculatorZilo Logo
  • Home
  • CalculatorsExpand
    • Browse all calculators
    • Education
    • Real Estate
    • Chemistry
  • Finance
  • Math
  • Health & Fitness
  • Science
  • About
  • Contact
CalculatorZilo Logo
Home / Gas Lantern Cost Calculator
Lighting & Electrical Calculators

Gas Lantern Cost Calculator

Published onJuly 11, 2025 Updated onOctober 21, 2026 8:47 pm

A gas lantern’s charm comes with a running cost, and that cost depends on three things: what fuel it burns, how fast it burns it, and what the fuel costs where you live. Propane, kerosene and natural gas all price differently and pack different energy into each unit, so a calculator that only understands one fuel gives you half the picture. This tool handles all three: enter the burn rate in BTU per hour or in fuel units per hour, your hours and days of use, and your local fuel price, and it returns total fuel, fuel cost, cost per hour, cost per day, and the all-in total if you include the lantern’s purchase price.

Gas Lantern Cost Calculator
Running cost for propane, kerosene and natural gas lanterns

Quick Answer

A propane camping lantern burning 0.25 gallons per hour for 6 hours a day over 7 days with propane at $3.50 per gallon uses 10.50 gallons and costs $36.75 in fuel: $0.88 per hour and $5.25 per day. The calculator above is pre-filled with this exact case, so one click on Calculate Lantern Cost reproduces every figure.

Key takeaways

  • Fuel decides the unit: propane and kerosene price per gallon, natural gas per therm. The same lantern run costs very different money on each fuel, and the table below prices all three side by side.
  • Enter the burn rate either way your manual states it: BTU per hour, converted using the fuel’s energy content, or fuel units per hour you measured yourself.
  • Cost per hour is the comparison number, cost per day is the budgeting number, and the purchase price is optional: leave it blank and the tool prices fuel alone.
  • Zero is accepted everywhere on this tool. A zero in any required field returns a $0.00 result rather than an error, so check a suspiciously cheap answer for an accidental zero first.
On this page
  • Quick Answer
  • How to use the gas lantern cost calculator
  • The gas lantern cost formula and the energy behind it
  • Worked examples: a camping week and a month of porch evenings
  • Why real lanterns burn more than the rating says
  • What competing calculators miss
  • Frequently asked questions
  • Add This Calculator to Your Website
  • References

How to use the gas lantern cost calculator

Pick your fuel first, enter the burn rate in whichever unit you have, add hours per day, days of use and your local fuel price, then click Calculate Lantern Cost. The results stay hidden until you calculate, and Reset restores the worked example.

  1. Select the fuel type: it sets the energy content used for conversion and the unit your price is entered in. Propane and kerosene are priced per gallon; natural gas is priced per therm, the unit on a home gas bill. Changing the fuel relabels the price field so the unit stays in front of you.
  2. Choose the burn rate unit: BTU per hour if you are reading the figure from a manual or a data plate, fuel units per hour if you have measured consumption yourself. Changing this relabels the burn rate field to match.
  3. Enter the burn rate: at the flame setting you actually use, not the maximum. A lantern dimmed for ambience burns a fraction of its full-output rating.
  4. Enter the fuel cost: your local price in the unit the label shows. If you burn disposable 1 lb cylinders, convert first: a cylinder holds about a quarter of a gallon, so a $5 cylinder is roughly $21 per gallon in fuel terms, and that is the honest price to enter.
  5. Add hours per day and days of use: a weekend trip, a month of porch evenings, or a full season. The tool applies no cap: hours above 24 are calculated as entered, which suits multi-lantern sites pricing a combined daily burn, but a single lantern cannot burn more than 24 hours in a day.
  6. Add the purchase price only if you want the all-in figure: it appears as its own row and is added once to the total. Leave it blank and it counts as zero.

The gas lantern cost formula and the energy behind it

Total fuel is burn rate multiplied by hours per day and days; fuel cost is total fuel multiplied by the price per unit; the total adds the optional purchase price once. When the burn rate arrives in BTU per hour, one division by the fuel’s energy content converts it first.

Fuel per hour (from BTU) = Burn rate (BTU/hr) / Energy content (BTU per unit)
Total fuel used = Fuel per hour × Hours per day × Days
Fuel cost = Total fuel used × Cost per fuel unit
Cost per hour = Fuel per hour × Cost per unit  |  Cost per day = Cost per hour × Hours per day
Total cost = Fuel cost + Lantern purchase price (if entered)
FuelPriced perEnergy content usedA 1,500 BTU/hr lantern burns
Propanegallon91,500 BTU/gallon0.0164 gallons per hour
Kerosenegallon135,000 BTU/gallon0.0111 gallons per hour
Natural gastherm100,000 BTU/therm0.0150 therms per hour

Those energy contents are reference values, not inventions of this page. The Encyclopaedia Britannica’s entry on the therm defines it as 100,000 British thermal units, the exact natural gas unit the tool uses, and the U.S. Energy Information Administration’s explainer on British thermal units sets out how fuel quantities are compared on a heat-content basis. Kerosene at 135,000 BTU per gallon is the federal appliance-labelling figure, and propane near 91,500 BTU per gallon is the standard reference value used across the propane industry; the Penn State EGEE 102 fuel comparison lists the same class of figures for course use. Notice what the table means in practice: kerosene packs about 48% more energy per gallon than propane, so a kerosene lantern needs fewer gallons for the same hours, and whether that saves money depends entirely on the two local prices. If you want to compare fuels on price alone, the cost per BTU calculator reduces any fuel price to a cost per unit of heat.

Worked examples: a camping week and a month of porch evenings

Two runs cover the two ways this tool gets used: a portable propane lantern priced by the gallon it burns directly, and a fixed natural gas lantern priced from its BTU rating. Both reproduce exactly in the calculator.

Propane camping lantern (the pre-filled case). Burn rate 0.25 gallons per hour, 6 hours a day for 7 days, propane at $3.50 per gallon:

1. Fuel: 0.25 × 6 × 7 = 10.50 gal→ 2. Fuel cost: 10.50 × $3.50 = $36.75→ 3. Per hour $0.88, per day $5.25

Natural gas porch lantern. Switch the fuel to natural gas and the burn rate unit to BTU per hour, then enter 1,500 BTU/hr, 5 hours a day for 30 days, gas at $1.20 per therm. The tool converts first: 1,500 / 100,000 = 0.015 therms per hour; total fuel is 0.015 × 150 hours = 2.25 therms; fuel cost is 2.25 × $1.20 = $2.70, which is $0.02 per hour and $0.09 per day at the tool’s two-decimal rounding. A fixed porch lantern on piped gas is startlingly cheap to run per evening; its cost lands on the household gas bill, where it mixes with heating and hot water in the utilities cost per month calculator.

Same lantern, same evenings, three fuels. This table runs one 1,500 BTU/hr lantern for 5 hours a day over 30 days at illustrative local prices (propane $3.50 per gallon, kerosene $4.00 per gallon, natural gas $1.20 per therm). Enter your own prices above; the ranking follows your prices, not these.

FuelTotal fuelFuel costPer hourPer day
Propane2.46 gallons$8.61$0.06$0.29
Kerosene1.67 gallons$6.67$0.04$0.22
Natural gas2.25 therms$2.70$0.02$0.09
Propane
$0.06/hr
Kerosene
$0.04/hr
Natural gas
$0.02/hr

Natural gas wins this comparison because a therm of piped gas is cheap next to a gallon of delivered propane, not because the lantern is more efficient on it: the burner consumes the same 1,500 BTU per hour either way. The cost of energy calculator makes the same point across a wider set of fuels and appliances if you are choosing how to light or heat a space from scratch.

Why real lanterns burn more than the rating says

The rated burn figure assumes a steady flame in still air with a healthy mantle. Real evenings rarely cooperate, and the gap between the estimate and the tank is predictable.

  • Wind: a gusty site makes the flame work harder and strips heat away, so exposed lanterns burn at the top of their range. A sheltered spot is a fuel saving, not just a comfort.
  • Flame setting: the rating is usually quoted at a normal setting. Running flat out for maximum brightness can double consumption against a dimmed lantern.
  • Mantle and burner condition: a torn mantle or a dirty burner wastes fuel as soot and unburned gas. If your actual use drifts upward over a season, maintenance is the first suspect.
  • Altitude: thinner air changes combustion, and high campsites rarely match sea-level test figures.
  • How you buy the fuel: bulk propane by the gallon and disposable cylinders are the same fuel at wildly different prices. The per-gallon equivalent of a $5 one-pound cylinder is roughly $21, which turns a $0.88-per-hour lantern into one costing several dollars an hour. Price the fuel the way you actually buy it.

To replace the rating with your own number, weigh a cylinder before and after a timed burn, or track how many hours a known fill lasts across several evenings, then enter that rate in fuel units per hour. Your measured rate absorbs your wind, your altitude and your flame habits in one figure. If the comparison you actually need is gas light against electric light for a fixed installation, price the electric side with the room’s lighting layout in the ceiling light calculator and set the two per-evening figures side by side.

What competing calculators miss

Lantern tools are scarce, and the few that exist each cover one corner of the problem. Four reference points dominate this search:

  • CalculatorsHub (gas lantern cost): works in whole disposable cylinders, rounding 0.56 of a cylinder up to 1, and folds the lantern, the first cylinder and mantles into an upfront cost. Honest about how campers actually buy fuel, but propane-cylinder only: no kerosene, no natural gas, no cost per hour or per day, and no way to price bulk fuel.
  • Savvy Calculator (gas lantern cost): propane only, gallons per hour only, with a total and a purchase-inclusive total. Its worked example treats 6 hours as the whole usage period, so there is no hours-per-day by days structure for a season of evenings, and no BTU path for a manual-rated lantern.
  • CamperUpgrade (canister runtime): answers how long a canister lasts, appliance by appliance, and never prices anything. Runtime and cost are different questions; this page answers the cost question and the FAQ below covers the runtime shortcut.
  • The older single-fuel tools behind this search: natural-gas-only versions priced a lantern per 100,000 BTU and stopped there. They cannot touch a propane camping lantern or a kerosene lamp at all.
  • The gap this page fills: three fuels with proper energy conversion, both burn-rate units, cost per hour and per day alongside the total, and an optional purchase price, in one tool. No rival combines those pieces, and none of them shows the per-hour figure at all. What this tool deliberately leaves out is cylinder shopping: whole-cylinder rounding and mantle costs belong to a packing list, not a running-cost figure.

Frequently asked questions

Multiply the burn rate by the fuel price: a lantern burning 0.25 gallons of propane per hour at $3.50 per gallon costs about $0.88 per hour. Use the calculator for your exact figures.

It depends on local prices, but natural gas is usually cheapest per BTU where piped gas is available, followed by propane, with kerosene varying widely. Run the three fuels through the calculator with your local prices to compare.

Typical lanterns burn 1,000 to 2,000 BTU per hour at a normal flame setting. Check the manual for your model’s rated consumption.

For budgeting a trip or a season, yes: it is part of the true cost of choosing gas light over alternatives. The calculator adds it as an optional line.

Wind, altitude, high flame settings, and worn mantles all raise consumption above the rated figure. Estimate the burn rate by timing a burn and weighing the fuel before and after for your specific lantern.

For occasional ambiance, gas is competitive; for nightly use over a season, electric or solar usually wins on running cost. Compare the per-day figure here against your electricity rate.

About 14 hours at a 1,500 BTU per hour setting. A 1 lb cylinder holds roughly 21,500 BTU, and runtime is cylinder energy divided by burn rate, so a 1,000 BTU per hour lantern runs about 21 hours on the same cylinder. The calculator prices fuel by the gallon or therm; enter your cylinder cost per gallon equivalent if you want cylinder fuel priced exactly.

Add This Calculator to Your Website

Embed this calculator on your own site with the code below. Pick a size to preview it live, then copy the code.

Powered by Calculator Zilo

References

  1. Federal Trade Commission. 16 CFR Part 305, Appendix L: representative average unit energy costs and fuel energy equivalences. Accessed October 21, 2026.
  2. U.S. Energy Information Administration. British thermal units (Btu). Accessed October 21, 2026.
  3. U.S. Energy Information Administration. How do I convert natural gas prices in dollars per cubic feet to dollars per British thermal unit or therm? Accessed October 21, 2026.
  4. Encyclopaedia Britannica. Therm, unit of measurement. Accessed October 21, 2026.
  5. National Institute of Standards and Technology. British Thermal Unit (Btu), glossary term. Accessed October 21, 2026.
  6. Pennsylvania State University, EGEE 102 Energy Conservation. Fuel choices: capacity, consumption and energy content by fuel. Accessed October 21, 2026.

Related calculators

Lighting & Electrical CalculatorsParallel Circuit Resistance CalculatorTwo resistors in parallel are easy.Lighting & Electrical CalculatorsElectrical Cable Size CalculatorThis electrical cable size calculator sizes a cable by voltage drop only.Lighting & Electrical CalculatorsConductor Size CalculatorA conductor has to pass two different tests: carry the current without overheating, and deliver it without losing too much voltage along the run.Lighting & Electrical CalculatorsAmp Watt CalculatorAmps tell you how much current is flowing, watts tell you how much power that flow delivers, and volts are the missing middle term that connects them.Lighting & Electrical Calculators Recessed Lighting CalculatorHow many recessed lights does a room actually need?Lighting & Electrical Calculators Ceiling Light CalculatorMost rooms get their ceiling lights by guesswork: a contractor rule of thumb, a grid copied from the showroom, or however many fixtures were on sale.

We use cookies to analyze traffic. You can accept or decline cookies below. Learn more

calculatorzilo

CalculatorZilo

Free calculators for everyday life. No signup, no cost, just answers.

Categories

Finance Math Health & Fitness Education Science Real Estate Chemistry Browse all calculators

Popular tools

Mortgage Payment Calculator BMI Walking Calculator Salary Per Minute Calculator Percentage Off Calculator

Company

About Us Contact Us Privacy Policy Terms and Conditions
Disclaimer Cookie Policy DMCA Policy Affiliate Disclosure FAQ Accessibility Statement

© 2026 CalculatorZilo • Free calculators for everyone

  • Home
  • Calculators
    • Browse all calculators
    • Education
    • Real Estate
    • Chemistry
  • Finance
  • Math
  • Health & Fitness
  • Science
  • About
  • Contact
Search