Water To Weight Calculator
A gallon of water weighs 8.34 pounds, but only at the right temperature: hot water is measurably lighter. This water weight calculator converts any volume of water into weight using temperature-corrected density from standard water tables. Going the other direction, our weight to volume calculator handles any material, and our liquid volume calculator sizes the tanks that hold it.
Density from standard water tables at 1 atm, interpolated between tabulated temperatures. Dissolved salts and impurities shift real water slightly.
Quick Answer
Two US gallons of water at 20 C weigh about 7.56 kg (16.66 lb). At 4 C, where water is densest, the same two gallons weigh 7.57 kg: only 14 g more, so temperature is a fine-tuning knob, not the main event. Enter your volume above.
The formula: weight = volume x density
That is the whole calculation. The subtlety is that water’s density is not a constant: it peaks near 4 C at about 999.97 kg/m3 and falls to about 958.4 kg/m3 at boiling, a 4% range. The calculator looks up the density for your temperature from standard tables (interpolating between tabulated points) and multiplies. For most household purposes the famous shortcuts, 1 liter = 1 kg and 1 gallon = 8.34 lb, are within a percent of the careful answer.
Worked example: 2 gallons at room temperature
The defaults are 2 US gallons at 20 C:
Click Calculate with the defaults to reproduce every one of these numbers.
Water density by temperature
The table the calculator interpolates from, at 1 atmosphere:
The same density idea applies beyond water: our density calculator solves for mass, volume, or density when you know the other two.| Temp (C) | Density (kg/m3) | 1 liter weighs |
|---|---|---|
| 0 | 999.841 | 0.99984 kg |
| 4 | 999.975 | 0.99998 kg |
| 10 | 999.700 | 0.99970 kg |
| 20 | 998.204 | 0.99820 kg |
| 30 | 995.652 | 0.99565 kg |
| 40 | 992.215 | 0.99222 kg |
| 60 | 983.195 | 0.98320 kg |
| 80 | 971.800 | 0.97180 kg |
| 100 | 958.405 | 0.95841 kg |
Notice the peak at 4 C: water expands as it cools below that, which is why ice floats and why lakes freeze top-down. The total swing from 4 C to boiling is about 4.2%.
What competing water-weight tools get wrong
Typical water-weight tools
- Use a flat 1 kg/L with no temperature input, wrong by up to 4% for hot water.
- One popular tool’s linear temperature approximation drifts badly above 50 C.
- Rarely show the density they used, so the answer cannot be checked.
This calculator
- Interpolates real tabulated density across 0-100 C from standard tables.
- Shows the exact density used for every calculation.
- Reports kg, g, lb, oz, and metric tons in one pass.
Frequently asked questions
One US gallon weighs about 8.34 lb (3.79 kg) at 4 C, where water is densest. At room temperature (20 C) it is about 8.33 lb. An imperial gallon is larger: about 10.02 lb.
Yes, measurably. A liter at 4 C weighs 0.99998 kg; at 80 C it weighs 0.97180 kg, about 2.8% less. For a bathtub the difference is a few kilograms; for a teacup it is negligible.
Below 4 C, water molecules start arranging into the open crystal structure of ice, which takes up more space. At 4 C the molecules are packed tightest before that ordering begins. This quirk is why ice floats and lakes freeze from the top down.
Almost exactly 1 kg at 4 C (0.99998 kg). At room temperature it is 0.998 kg. For cooking and everyday math, 1 liter = 1 kg is fine.
Yes. Seawater at typical ocean salinity is about 2.5% denser than pure water, around 1,025 kg/m3. This calculator uses pure-water tables; add about 2.5% for seawater estimates.
About 998 kg at room temperature, or very nearly one metric ton. This is why the metric ton was originally defined around water: 1 m3 of water = 1 tonne at 4 C.
Add This Calculator to Your Website
Put this water weight calculator on your own website or blog. Copy the code below and paste it into your page HTML. The embedded calculator updates automatically whenever we improve it.
References
[1] Kell, G.S. “Density, thermal expansivity, and compressibility of liquid water from 0° to 150°C: Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale.” Journal of Chemical & Engineering Data 20(1): 97–105 (1975). ACS Publications (Accessed Oct 25, 2026).
[2] NIST Chemistry WebBook. “Isobaric properties for water at 1 atm (IAPWS Formulation 1995).” NIST WebBook (Accessed Oct 25, 2026).
[3] Wagner, W.; Pruß, A. “The IAPWS Formulation 1995 for the Thermodynamic Properties of Ordinary Water Substance for General and Scientific Use.” Journal of Physical and Chemical Reference Data 31(2): 387–535 (2002). DOI (Accessed Oct 25, 2026).
[4] Shearman, K. (Oregon State University), NOAA Tech Refresh, “Properties of the Ocean” (Jan 20, 2012). Typical seawater density: freshwater 1000 kg/m3, saltwater 1025 kg/m3; typical ocean salinity about 3.5% (35 ppt). Supports the FAQ seawater comparison only; the calculator itself uses pure-water tables. NOAA Tech Refresh (PDF) (Accessed Oct 25, 2026).
[5] OpenStax College Physics. “Density.” Density is mass per unit volume (ρ = m/V); water mass = volume × density, with the /1000 conversion for liters and kg/m3. Physics LibreTexts (OpenStax) (Accessed Oct 25, 2026).
